Floating Breakwater – Wave Diffuser

The breakwater is a modular design element that gives great scalability and flexibility.

It has a polygonal shape and is made of low density polyethylene (LDPE). Its weight is 16.3kg.

The design of the unit allows it to be filled with water to precisely adjust the buoyancy. It can also be filled with sand or expanded polystyrene which makes the unit imprervious.

Each breakwater unit is connected to a cable system – rope and additional parts with EPDM cladding, as well as a stainless steel anchoring system.

Its innovative shape not only attenuates the ripple, but also improves the breakwater resistance.

The breakwaters can be produced in different colors.

Floating breakwaters are designed to efficiently extract energy from water and have a wave damping efficiency of 90% (wave height 1.2m damping 15cm).

Technical Characteristics

  • Shape: Polygonal 34 sides
  • Material: Low Density Polyethylene (LDPE)
  • Weight: 7kg
  • Dimensions: 75 x 75 x 27 cm (HxLxW)
  • UV protection
  • Life span 20+ years
  • Modular construction
  • Expanded polystyrene filling that makes in impermeable (optional)

Priced at: 350€ / Sq. meter

In test, the floating breakwater has shown a transmission factor of 0.1-0.4 (diffuses 90% – 60% of the energy from the waves) for coastal waves with periods of 5 seconds. In appplications using a floating breakwater damper to minimize beach erosion as a mild application solution is even more effective.

Given its flexibility and modular structure requires little installation time. Can be easily removed and transported.

It is very easy to modify the floating breakwater. If the original installation needs to be modified, the modular structure makes it relatively easy to adjust.

The anchorage system has the ability to withstand coastal waves in storms with winds of up to 80 knots.

The expected useful life of the products is up to 20 years.

Παράγεται στην Ελλάδα

Wave Breaker Anchorage

Wavebreaker Module Material: HDPE Marlex 50100
Size: 770*770*280mm
Weight: 7kg/pc (±3%)
Cable & Rubber Cover Cable Material: 316SS
Spec.: φ24mm
Rubber Material: EPDM;
Spec.: OD45mm, ID35mm
316SS Washer Material: 316SS
Spec.: OD150mm; ID55mm
Thk: 3mm
316SS Shackle Material: 316SS
Spec.: φ10mm
Including bolts, nuts, flat washers and spring washers
Middle Connector Material: 316SS
Spec.: Thick 10mm
Including bolts, nuts, flat washers and spring washers
End Connector Material: 316SS
Spec.: 10mm
Including bolts, nuts, flat washers and spring washers